You are here: Home > Shop > Amplifiers/Receivers/Processor > AV Receivers > Denon AVPA1HD AV PRE AMP
Denon AVPA1HD AV PRE AMP
- Brands:
- Denon
- Price:
- NZD $17499.00
- Important Networking information, please ckick here
- All new circuit layouts that shorten audio and video signal paths for best sound and picture
- Fully separated Audio, Video, Pre-Amplifiers and Power Supplies allow for a cleaner and clearer signal path
- High current two Toroidal Power Supply to drive XLR Pre-amplifier and Analog Audio channels
- THX Ultra2 certified
- Pre-amp, amplifier, and volume control in discrete configuration as a single component
- Discrete Devices for ultimate performance in each circuit block (D.D.S.C.-HD)
- Dolby TrueHD and DTS-HD Master Audio decoders
- Audio DACs in dual differential mode (1 per audio channel) on all output channels
- To preserve original sound quality for the room's acoustics at any volume level, Audyssey Dynamic EQ loudness correction technology
- Realta sxT2 HQV processing for i/p and scaling
- Deep Color (30/36-bit) and "x.v.Color" support
- Discrete construction and circuitry for highest quality video processing
- HDMI to HDMI scaling up to 1080p
- HD/SD video noise reduction functionality
- Network Audio and Photo Streaming
- Compressed Audio Restorer to enhance digital music files
- Music streaming from the Rhapsody music service site
- New user interface for easy operation, setup and digital media browsing (G.U.I.)GUI-assisted operation even during 1080p output from HDMI
- Dual HDMI outputs enabling simultaneous output to video projector and flat panel
- Three Analog and One Digital, Four Zone multi-source capability
- Zone 2 OSD with text, Album art is also available
- Web setup, save and load all settings via Ethernet
- Sophisticated Construction for the Ultimate A/Vplayback
- 7 individual transformers to supply power to each discrete circuit
- Direct Mechanical Ground to minimize mechanical vibration from transformer and radiators
- 3 All New SHARC 32-bit floating point DSPsMaster clock design for more accurate processing and less jitter noise
- Advanced AL24 processing provides more dynamic range
- Audio ADCs in differential mode (2 per audio channel) on all analog input channels
- DSP processing of EXT IN analog audio input is possible.
- Denon surround modes can also be enjoyed with external input audio signals.
- Newly improved Audyssey MultEQ XTNew tower type microphone for more accurate measuring
- Up to eight measurement points
- New filtering ALFC (Adaptive Low Frequency Correction) for higher resolution processing in the low frequency band
- Full 10-bit processing video circuit
- Multi Cadence Detection for accurate i/p conversion
- 1080/24p pass through
- Analog video to HDMI scaling up to 1080p
- 12-bit/216-MHz video encoder and decoder with NSV
- Digital Media Connectivity
- Network Audio and Photo Streaming
- DLNA Certified
- Playback and control music files from PC and DLNA Servers
- AAC, WMA , MP3, FLAC, WAV file support
- Connect to over 7,000 internet radio stations
- JPEG Photo slideshow
- Connect to your network via Ethernet or Wi-Fi (802.11 b/g compatible)
- Web system control via any PC on the network
- iPod audio, photo and video playback (optional ASD-1R/3N/3W)
- Mass storage support USB for audio and photo playback (MTP compatible)
- Album art support (iPod/Network/USB)
- Title text (iPod/Network/USB/XM/HD radio)
- Multi language support
- Remote control unit with GLOW-KEY buttons for easy operation in the dark
- Multi-Zone Capabilities
- Digital to analog conversion for multi-zone output
- Analog to digital conversion for multi-zone digital output (only Zone2)
- Zone 2 equipped with dedicated video decoder (+N.S.V.) and encoder
- Independent zone 2 component output
- Dual component outputs for main zone
- BNC connectors for component input/output
- IR Remote in/out ports
- +12V, 250mA trigger x 4 outputs
- RS-232C control x2
- Optional RC-7000CI/7001RCI 2-way control ready
- Main Specifications
- Pre-amplifier Section
- Input sensitivity/impedance
- PHONO(MM) 2.5 mV
- Audio inputs RCA (unbalanced) 200 mV/47 kohms
- XLR (balanced) 400 mV/100 kohms
- Output level/Load impedance
- Audio outputs RCA (unbalanced) 1.2 V
- XLR (balanced) 2.4 V
- General
- Power supply AC 230 V, 50 Hz
- Power consumption 150 W
- (Standby: 0.3 W )
- Dimensions W x H x D 434 x 214 x 485 mm
- Weight 27.5 kg
- Input / Output terminals
- IN HDMI 6
- Component 6 (1: BNC)
- S-Video
- Composite 8
- XLR 1
- Analog audio 10
- EXT. In 7.1ch
- Digital OPT 5
- Digital COAX 6 (2: BNC)
- Denon Link 3rd 1
- OUT HDMI monitor 2
- Component main monitor 2 (1: BNC)
- Zone 2 monitor 1
- S-Video REC 3
- Monitor / Zone 2 1 / 1
- Composite REC 3
- Monitor / Zone 2 1 / 1
- Zone 3 1
- Analog preout 9.3 ch XLR (Balanced)
- Analog preout 9.3 ch RCA (unbalanced)
- Analog audio REC 3
- Zone 2 / Zone 3 1 / 1
- Digital optical REC 2
- Zone 2 1
- REC / Zone 4 1
- Others Trigger +12 V, 250 mA 4
- RS-232C 2
- Control link 1
- Remote IN/OUT IN 1 / OUT 1
- Ethernet 1
- Wi-Fi (WLAN Antenna) 1
- USB 2
- Dock control 1
- Setup mic 1